Facility Structural & Systems Improvements
| Bidders ID: | NBD18725008348751370 |
|---|---|
| Due Date: | Sep 12, 2024 |
| Posted Date: | Sep 4, 2024 |
| Level of Government: | State & Local |
| State: | Ohio |
| Agency: | Ohio Facility Construction Commission |
| Category: |
|
| Solicitation Number: | DRC-25L206 |
| Source: | Members Only |
| Publish Date | Due Date | Project Number | Owner | Project Name | Primary Service | Estimated Project Cost | Q&A | Short List | Notes | ||
| 8/28/2024 | 9/12/2024 | DRC-25L206 | Ohio Department of Rehabilitation and Correction | Facility Structural & Systems Improvements | A/E | $500,000 | N/A | TBD |
Attachment Preview
Request for Qualifications (Architect / Engineer)
State of Ohio Standard Forms and Documents
Administration of Project: Local Agency
Project Name Facility Structural & Systems Improvements
Project Location Ohio Mail Processing Center
City / County
Owner
Youngstown / Mahoning
Ohio Department of Rehabilitation and
Correction
Delivery Method General Contracting
No. of paper copies requested (stapled, not bound)
0
Response Deadline 9/12/2024
2pm
Project Number
DRC-25L206
Project Manager
Gregory Hess
Contracting Authority Local Agency
Prevailing Wages State
No. of electronic copies requested (PDF)
local time
1
Submit the requested number of Statements of Qualifications (Form F110-330) directly to Elizabeth Lowery at
drc.camsrfq@drc.ohio.gov. See Section J of this RFQ for additional submittal instructions.
Submit all questions regarding this RFQ in writing to Elizabeth Lowery at drc.camsrfq@drc.ohio.gov with the project number
included in the subject line (no phone calls please). Questions will be answered and posted to the Opportunities page on the
OFCC website at http://ofcc.ohio.gov on a regular basis until one week before the response deadline. The name of the party
submitting a question will not be included on the Q&A document.
Project Overview
A. Project Description
Ohio Mail Processing Center opened in 1996, is a correctional mail processing center managed by Ohio Department of
Rehabilitation and Corrections. The facility is located at 884 Coitsville-Hubbard Rd. Youngstown, Ohio 44505 and is on
the same grounds as The Ohio State Penitentiary but operates independently with no offenders.
Currently, this facility requires some structural repairs and miscellaneous up-dates. The primary scope of work not limited
to the following;
1. Repair structural support column.
2. Install masonry dividing walls with door and hardware.
3. Provide isolated HVAC units.
B. Scope of Services
The selected A/E, as a portion of its required scope of services and prior to submitting its proposals, Will discuss and
clarify with the owner and/or the contracting authority, the cost breakdown of the Architect/Engineer Agreement detailed
cost components to address the owner’s project requirements. Participate in the Encouraging Diversity, Growth & Equity
(EDGE) Program as required by statute and the agreement.
As required by the Agreement, and as properly authorized, provide the following categories of services: Program
Verification, Schematic Design, Design Development, Construction Document Preparation, Bid and Award Support,
Conformed Documents, Construction Administration, Post-Construction, and Additional Services of all types.
Refer to the Ohio Facilities Construction Manual for additional information about the type and extent of services required
for each. A copy of the standard Agreement can be obtained at the OFCC website at https://ofcc.ohio.gov.
During the construction period, provide not less than 4 hours (excluding travel time) on-site construction administration
services each week, including (1) attendance at progress meetings, (2) a written field report of each site visit, (3) on-site
representation comprised of the A/E and its consultant staff involved in the primary design of the project, all having
relevant and appropriate types of construction administration experience.
For purposes of completing the Relevant Project Experience Matrix in Section F of the Statement of Qualifications (Form
F110-330), below is a list of relevant scope of work requirements for this RFQ:
1. Role of project (AE, C-AE, AOR, CMA/OA, CMR, DB, GC, Trade).
2. Project delivery method (MP, GC, CMR, DB).
3. Experience in design, scheduling, and cost estimation in a correctional facility.
F110-02-2022-MAR
Publish Date: 8/28/24
Page 1 of 4
Request for Qualifications (Architect / Engineer) continued
4. Experience with a Capital Improvement project for the State of Ohio/ODRC.
5. Experience with ODRC security requirements.
6. Experience with structural codes and regulations.
7. Experience with HVAC system design and integrations.
C. Estimated Budget / Funding
State Funding:
$500,000
Other Funding:
$0
Construction Cost: $393,000
Total Project Cost: $500,000
D. Anticipated Schedule
Professional Services Start:
Construction Notice to Proceed:
Substantial Completion of all Work:
Professional Services Completed:
01 / 25
06 / 25
11 / 25
01 / 26
E. Estimated Basic Fee Range (see note below)
6.0% to 8.0%
F. EDGE Participation Goal
Percent of initial Total A/E Fee:
5.0%
NOTE: Basic Services include: (1) Program Verification, (2) Schematic Design, (3) Design Development, (4) Construction Documents,
(5) Bidding and Award OR GMP Proposal and Amendment (as applicable), (6) Construction Administration, and (7) Closeout services. The
Basic Fee includes all professional design services and consultant services necessary for proper completion of the Basic Services, including
validation of existing conditions (but not subsurface or hidden conditions) and preparation of cost estimates and design schedules for the
project. The Estimated Basic Fee Range is calculated as a percentage of the Estimated Budget for Construction Cost above, including
the Owner’s contingency. The Basic Fee excludes any Additional Services required for the project.
G. Basic Service Providers Required (see note below)
Lead A/E Discipline: Architecture or Engineering
Secondary
Disciplines:
Structural Engineering
H. Additional Service Providers Required
Mechanical Engineering
NOTE: The lead A/E shall be (1) an architect registered pursuant to ORC Chapter 4703, (2) a landscape architect registered pursuant to ORC
Chapter 4703, or a (3) professional engineer or (4) professional surveyor licensed pursuant to ORC Chapter 4733.
I. Evaluation Criteria for Selection
• Demonstrated ability to meet Owner’s programmed project vision, scope, budget, and schedule on previous
projects.
• Previous experience compatible with the proposed project (e.g., type, size).
• Relevant past work of prospective firm’s proposed consultants.
• Past performance of prospective firm and its proposed consultants.
• Qualifications and experience of individuals directly involved with the project.
• Proposer’s previous experience (numbers of projects, sizes of projects) when working with its proposed
consultants.
• Specification writing credentials and experience.
• Experience and capabilities of creating or using Critical Path Method (CPM) schedules and of using CPM
schedules as a project management resource.
• Approach to and success of using partnering and Alternative Dispute Resolution.
• Proximity of prospective firms to the project site.
Interested A/E firms are required to submit the Commitment to Participate in the EDGE Business Assistance Program
form in its Statement of Qualifications (Form F110-330) submitted in response to the RFQ, to indicate its intent to contract
with and use EDGE-certified Business Enterprise(s), as a part of the A/E’s team. The Intent to Contract and to Perform
and / or waiver request letter and Demonstration of Good Faith Effort form(s) with complete documentation must be
attached to the A/E’s Technical Proposal. Both forms can be accessed via the OFCC website at https://ofcc.ohio.gov. The
Intent to Contract and to Perform form is again required at the Fee Proposal stage.
If the A/E firm intends to receive points for exceeding the EDGE Participation Goal, it must provide BOTH a
completed Commitment to Participate form AND a completed Statement of Intent to Contract and to Perform forms
signed by both parties with its Statement of Qualifications.
For all Statements of Qualifications, please identify the EDGE-certified Business Enterprises, by name, which will
participate in the delivery of the proposed professional services solicited in the RFQ.
F110-02-2022-MAR
Publish Date: 8/28/24
Page 2 of 4
Request for Qualifications (Architect / Engineer) continued
Interested A/E firms must indicate on their Statement of Qualifications, the locations where their services will be
performed in the spaces provided or by attachment in accordance with the requirements of Executive Order 2019-12D
related to providing services only within the United States and the requirements of Executive Order 2022-02D prohibiting
purchases from or investment in any Russian institution or company. Failure to do so may cause their Statement of
Qualifications to be rejected.
J. Submittal Instructions
Firms are required to submit the current version of Statement of Qualifications (Form F110-330) available via the OFCC
website at https://ofcc.ohio.gov.
Electronic submittals should be combined into one PDF file named with the project number listed on the RFQ and your
firm’s name. Use the “print” feature of Adobe Acrobat or similar software for creating a PDF rather than using a scanner. If
possible, please reduce the file size of the PDF. In Acrobat, go to Advanced, then PDF Optimizer. Also, please label the
CD or DVD and the sleeve with the project number and firm name if applicable.
Paper copies of the Statement of Qualifications, if requested, should be stapled only. Do not use special bindings or
coverings of any type. Cover letters and transmittals are not necessary.
Facsimile copies of the Statement of Qualifications will not be accepted.
Statements of Qualifications must be submitted electronically by email. Submittals are limited to one email with a
maximum file size of 25 MB.
Firms are requested to identify professional registrations, memberships and credentials including: LEED GA, LEED AP,
LEED AP+, CCCA, CCM, CCS, CDT, CPE, DBIA, and any other appropriate design and construction industry credentials.
Identify that information on the resume page for individual in Block 22, Section E of the F110-330 form.
F110-02-2022-MAR
Publish Date: 8/28/24
Page 3 of 4
Architect / Engineer Selection Rating Form
State of Ohio Standard Forms and Documents
Project Name Facility Structural & Systems Improvements
Project Number DRC-25L206
Proposer Firm
City, State, Zip
Selection Criteria
1. Primary Firm Location, Workload and Size (Maximum 10 points)
a. Proximity of firm to project site
b. Amount of fees awarded by Contracting Authority in
previous 24 months
c. Number of licensed professionals
Less than 50 miles
50 miles to 100 miles
More than 100 miles
Less than $50,000
$50,000 to $100,000
More than $100,000
Less than 2 professionals
2 to 4 professionals
More than 4 professionals
2. Primary Firm Qualifications (Maximum 30 points)
a. Project management lead
b. Project design lead
c. Technical staff
d. Construction administration staff
Experience / ability of project manager to
manage scope / budget / schedule / quality
Experience / creativity of project designer to
achieve owner’s vision and requirements
Experience / ability of technical staff to create
fully coordinated construction documents
Experience / ability of field representative to
identify and solve issues during construction
3. Key Consultant Qualifications (Maximum 20 points)
a. Key discipline leads
b. Proposed EDGE-certified Consultant participation*
Experience / ability of key consultants to
perform effectively and collaboratively
One point for every 2 percent increase in
professional services over the EDGE
participation goal
4. Overall Team Qualifications (Maximum 10 points)
a. Previous team collaboration
b. LEED** Registered / Certified project experience
c. BIM project experience
d. Team organization
Less than 2 sample projects
2 to 4 sample projects
More than 4 sample projects
Registered LEED v4.0 or v4.1 projects
Certified LEED v4.0 or v4.1 projects
Training and knowledge
Direct project experience
Clarity of responsibility / communication
demonstrated by table of organization
5. Overall Team Experience (Maximum 30 points)
a. Previous team performance
b. Experience with similar projects / delivery methods
c. Budget and schedule management
d. Knowledge of Ohio Capital Improvements process
Past performance as indicated by
evaluations and letters of reference
Less than 2 projects
2 to 4 projects
More than 4 projects
Performance in completing projects within
original construction budget and schedule
Less than 2 projects
2 to 4 projects
More than 4 projects
Value
Score
5
2
0
2
1
0
3
2
1
Max
=3
0 - 10
0-5
0-5
0 - 10
Max
= 20
0 - 15
0-5
1
2
3
Max
=3
1
Max
2
=2
1
Max
3
=3
0-2
0 - 10
0-3
4-6
7 - 10
0-5
0-1
2-3
4-5
* Must be comprised of professional design services consulting firms and NOT the lead firm - For more
information on scoring this and other criteria refer to Document F199-01 - PS Selection Rating Rubric.
** Leadership in Energy & Environmental Design administered by Green Business Certification Inc.
Notes:
Evaluator:
Name
Subtotal
Signature
Date
F110-02-2022-MAR
Publish Date: 8/28/24
Page 4 of 4
You are viewing the opportunity summary page, which includes a brief overview and a preview of the attached documents.
Disclaimer: The details regarding bids, requests for proposals (RFPs), and requests for qualifications (RFQs) on this site are provided for convenience and do not represent official public notice. To respond to or inquire about bids, RFPs, or RFQs, please contact the appropriate government department.
TRY FOR FREE
Not a GovernmentBidders Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.